Market situation On Jan.1
 furfural
 

123

wang

wang
 

Tel: +86 0311-86683938
Fax: +86 0311-86682938
Plant Add: North industry in Wuji county area,Shijiazhuang,China
Head office Add: 2701 NO.336 HEPING EASTRD,SHIJIAZHUANG P.R.CHINA
Headoffice E-mail:  furfurals@163.comfuranss@163.com

Http://  www.furanss.com

 

 

 
 

   Hebei Furan International Co,Ltd is a Producing and Trading integration enterprise who holding her plural patterns management and international operation. With the high quality products serials of  FURFURAL, FURFURYL ALCOHOL and FURAN RESIN, she is widely known by the world .

The annual production of the article: Furfural 25000Mts, FURFURYL ALCOHOL 20000 Mts and 15000 Mts for FURAN RESIN.

  Current Position: >> Home >> Products center 
 

Furan resin for FRP

Furan resin for FRP

一、Brief introduction

    The product was developed by Architecture Institute of Metallurgy Ministry who refer to the similar product of West Germany and passed the technology appraisal of Metallurgy Ministry.

    The Furan resin for FRP (anticorrosive) it is high adherence strength, good heat resistant and good anticorrosive in all organic solvents. It is an ideal adhesive because of its acid resistant and alkali resistant to be used on some occasions where can't use epoxy resin,phenolic resin and unsaturated polyester resin.it consists of liquid and furan resin powder two components.(to produce glass fibre reinforced plastic when mixed with the powder of glass fibre reinforced plastic)

    The product shows good resistant to most of acid and alkali and can be used under the temperature of about 220℃. The construction is Convenient, have applied extensively in anticorrosive, The products was developed furan series products

二、Technical Index

1.Appearance Red-brown glutinous liquid

 

Viscosity: 20-150s(spread-4)

Density≥1.18/cm3

 

 

 2.Appearance:

Gray powder

Hardening of time

20℃)No more than 14 hours

     

 三、Proportioning

Item

Furan resin for FRP

Furan resin FRP gum

1

Furan resin FRP catalyst powder

1.0-1.5


四、Main Anticorrosive Property

Medium

Anticorrosive level

Medium

Anticorrosive level

5~60% Sulfuric acid

good

40% sodium hydroxide

 

Good

37% Hydrochloric acid

passable

Toluene, formaldehyde

good

50% zinc sulfate

good

Methanol, ethanol

good

20% Acetic acid

good

30% Sodium chloride

passable

10% Nitric acid

passable

40%sulfuric acid and 10% soda lye to supersede

passable

10% Chromic acid

passable

15% Hydrogen peroxide

passable

75% phosphoric acid

good

20% ammonium hydroxide

good

50% carbon bisulfide

passable

Chlorine

passable

ammonia

good

Dimethoate

Passable

hydrofluoric acid

passable

water

Good

 

 五、 Furan resin for FRP main experiment result                                    

Tensile strength

Mpa

80

Compression strength

Mpa

50

 

 

 

Hardening time

30,h

24

The highest use temperature

 

220

 

 

 

六、Usage 

Furan resin for FRP can use building corrosion resistance, impermeable layer, lining brick plate, Corrosion resistant bricks, casting slabs and granite furan resin concrete tank, pool, floor, etc. Also can be used for lining anticorrosion equipment metal protection.

七、Usage methods and Check standard :

The product is of appropriate thickness, good mixedness and reliable quality, according with the current technology standard of anticorrosive engineering and specification for construction and acceptance of anticorrosive engineering of buildings GB 50212-2002

1、     Mix the good furan resin for FRP, considering that must be used in 40 minutes to complete, mix every portion furan resin FRP in 2-3 kilograms . first take out the Furan resin FRP catalyst powder,then take out Furan resin gum, After strict calculation, fully mix can be used. When the environment temperature over 30, should reduce ratio.

2、     Please do not use other any curing agent to join in the furan resin gum.

3、     Construction began in may try matching before a portion.

八、Safe Storage and Package (stored in the ventilated and dry place)

The period of validity of Furan resin FRP gum is one year(30-250KG/drums),

the period of validity of Furan resin FRP harden powder is one year (25KG/bag).

 

Hebei Furan International Co.,Ltd.

Shijiazhuang Worldwide Furfural and Furfuryl ALcohol Co.,LTd

Plant add:Notth Industry In Wuji County area, Shijiazhuang City , China

TEL:0086 311 86683938

FAX:0086 311 8668 2938

MSN:furfurals@yahoo.com.cn

WWW. furanss.com  or  www.furfuryl.com

e-mail: furfurals@163.com

 

   
版权所有河北两糠国际贸易有限公司   CopyRight©2008-2009 All Rights Reservered   经营许可证号冀ICP备05442248号     点击给我留言
技术支持:石家庄龙脉网络有限公司
用中文查看该页 日本語ページを表示するに  См. стр. на русском языке 用韩文查看该页 用阿拉伯文查看该页